Ordinary faults
Finding the faults is in itself a separate unit, since it needs special expertise and experience, but also the right equipment quickly. In cooperation with the customer, the electrician should respond promptly to repair the damage as soon as possible.We are here to offer our help.Below there are some faults.
Electric heater
If the water heater does not heat the water then: We look at the light on the panel. If it does not light up, the safety of the water heater is broken. If it lights up and there is no hot water, it is possible that the thermostat has failed or the resistance of the electric heater has been burned.In this case we are your only option,because we have to change the resistence.
faulty fuse
If we do not have power at home: We check if there is a power failure. Then, after looking at the table in detail, we see if there are lower individual securities. If all the fuses are up and there is no current, it is most likely that the fuse has been burned either on the panel or on the PPC watch.
fallen relay
If the leakage relay continuously falls: If the anti-electrocution relay does not rise, then it is most likely to leak into an electrical line. The first thing we do is close all the fuses and all the lights, then remove all the electrical appliances from the socket. If the problem persists, that is, not holding the button from the leakage relay, it is most likely to leak into an electrical line. Contact the electrician immediately.
Short circuit line
In old mainly installations, where the power lines are few and damaged, the power lines are often short-circuited. The most common cause is the overloading of the electrical lines and in this case the repair - replacement of the damaged part is required. Avoid electrifying radiators in simple lines (not reinforced) in old installations. Enhanced line is for example the laundry line.
